Rubber Hose For Fuel Dispensing

As per IS : 2396 : 1988

For use in dispensing pumps for petrol and diesel fuels.

 Sythetic Nitrile tube

 Soft wall : textile braided reinforecement.

 Hard wall : write braided reinforecement.

Abrasion and weather resistant colored cover.

Technical Specifications

Recommended For: Used in dispensing pumps for petrol and diesel fuels.

TUBE: Uniform lining of suitable rubber compound highly resistant to petroleum products. The lining is seamless up to 75 mm NB.

Reinforcement: Woven textile, which is well rubberized from both side with a suitable rubber compound.

Cover: Smooth or corrugated high grade chloroprene rubber compound for an excellent resistant to weather, abrasion & petroleum products.

End connections: Hoses can be supplied with built in nipple/flanges on request.

Electrical bonding: A copper wire comprising a number of strands is incorporated between the reinforcement piles to provide electrical continuity along the whole length of the hose.

Temperature range: -40° F to + 200° F

Length: Upto 20 Meters

Nominal Bore in MM Working Pressure in PSI Bursting Pressure in PSI
19.0 200 PSI 600 PSI
25.0 200 PSI 600 PSI
31.5 200 PSI 600 PSI